UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Form 10-Q

or

Commission file number 000-50646

Ultra Clean Holdings, Inc.

(650) 323-4100
Registrant’s telephone number, including area code

     Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ      No o

     Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Exchange Act). Yes o     No þ

     Number of shares outstanding of the issuer’s common stock as of April 30, 2005: 16,374,141.

Table of Contents

PART I. FINANCIAL INFORMATION

Item 1. Financial Statements

ULTRA CLEAN HOLDINGS, INC.
CONDENSED CONSOLIDATED BALANCE SHEETS
(Dollars in thousands, except share amounts)
(Unaudited)

See notes to condensed consolidated financial statements.

1

ULTRA CLEAN HOLDINGS, INC.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
(Unaudited)

See notes to condensed consolidated financial statements.

2

ULTRA CLEAN HOLDINGS, INC.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
(Unaudited)

See notes to condensed consolidated financial statements.

3

ULTRA CLEAN HOLDINGS, INC.
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)

1. Organization, Basis of Presentation and Significant Accounting Policies

     Organization — The Company is a developer and supplier of critical subsystems for the semiconductor capital equipment industry, focusing primarily on gas delivery systems and other subsystems, including frame and top-plate assemblies and process modules. The Company’s subsystems improve efficiency and reduce the costs of our customers’ design and manufacturing processes. The Company’s customers are primarily original equipment manufacturers (“OEMs”) of semiconductor capital equipment.

     Basis of Presentation — The unaudited condensed consolidated financial statements included in this quarterly report on Form 10-Q include the accounts of the Company and its wholly-owned subsidiaries and have been prepared in accordance with generally accepted accounting principles in the United States of America. This financial information reflects all adjustments, which are, in the opinion of the Company, of a normal and recurring nature and necessary to present fairly the statements of financial position, results of operations and cash flows for the dates and periods presented. The Company’s December 31, 2004 balance sheet data was derived from audited financial statements as of that date. All significant intercompany transactions and balances have been eliminated.

     The presentation of financial statements in conformity with generally accepted accounting principles in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. The Company bases its estimates and judgments on historical experience and on various other assumptions that it believes are reasonable under the circumstances. However, future events are subject to change and the best estimates and judgments routinely require adjustment. Actual amounts may differ from those estimates.

     The unaudited condensed consolidated financial statements should be read in conjunction with the Company’s audited consolidated financial statements for the fiscal year ended December 31, 2004 included in its Annual Report on Form 10-K filed with the Securities and Exchange Commission on March 30, 2005. The Company’s results of operations for the three months ended March 31, 2005 are not necessarily indicative of the results to be expected for any future periods.

     Concentration of Credit Risk — Financial instruments which subject the Company to concentrations of credit risk consist principally of cash and accounts receivable. The Company sells its products to US-based semiconductor capital equipment manufacturers. The Company performs credit evaluations of its customers’ financial condition and generally requires no collateral.

     The Company had significant sales to three customers, each accounting for 10% or more of sales: Applied Materials, Inc., Lam Research Corporation and Novellus Systems, Inc. As a group these three customers accounted for 90% and 93% of the Company’s sales for the three months ended March 31, 2005 and 2004, respectively.

     Fiscal Year — Effective January 1, 2003, the Company adopted a 52-53 week fiscal year ending on the Friday nearest to December 31. For presentation purposes, the Company presents each fiscal period as if it ended on the last day of the month. However, the first quarter of the 2005 fiscal year actually

4

ended on April 1, 2005 using the 52-53 week fiscal year. All references to quarters refer to fiscal quarters.

     Comprehensive Income — In accordance with SFAS No. 130, Reporting Comprehensive Income, the Company reports by major components and as a single total, the change in its net assets during the period from non-owner sources. Comprehensive income for the three month periods ended March 31, 2004 and 2005, respectively, was the same as net income.

     Stock-Based Compensation — The Company accounts for its employee stock purchase plan and employee stock-based compensation plan in accordance with the provisions of Accounting Principles Board (“APB”) Opinion No. 25, Accounting for Stock Issued to Employees, and Financial Accounting Standards Board (“FASB”) Interpretation (“FIN”) No. 44, Accounting for Certain Transactions Involving Stock Compensation. Accordingly, no compensation is recognized for purchase rights issued through the employee stock purchase plan or employee stock-based awards granted with exercise prices greater than or equal to the fair value of the underlying common stock at the date of grant. The Company complies with the disclosure provisions of FASB Statement of Financial Accounting Standards (“SFAS”) No. 123, “Accounting for Stock-Based Compensation”, as amended by SFAS No. 148, “Accounting for Stock-Based Compensation — Transition and Disclosure”.

     SFAS No. 123, Accounting for Stock-Based Compensation, requires the disclosure of pro forma net income as though the Company had adopted the fair value method since the inception of the Company. Under SFAS No. 123, the fair value of stock-based awards to employees is calculated through the use of option pricing models, even though such models were developed to estimate the fair value of freely tradable, fully transferable options without vesting restrictions, which differ significantly from the Company’s stock option awards. These models also require the use of subjective assumptions, including expected time to exercise, which greatly affect the calculated values.

     The Company amortizes deferred stock-based compensation on the straight-line method over the vesting periods of the stock options, generally four years. Had compensation expense been determined based on the fair value at the grant date for all employee awards, consistent with the provisions of SFAS No. 123, the Company’s pro forma net income and net income per share would have been as follows (in thousands, except per share data):

5

     These calculations were made using the Black-Scholes option pricing model for the three months ended March 31, 2005 and 2004. The weighted average estimated fair value of employee stock option grants for the three months ended March 31, 2005 and 2004 was $3.58 and $4.16, respectively. The following assumptions were used:

     Under SFAS 123, pro forma compensation cost is calculated for the fair market value of the stock purchase rights granted under the ESPP. The fair value of each stock purchase right granted under the ESPP is estimated using the Black-Scholes option pricing model with the following weighted average assumptions: (i) an expected dividend yield of 0%, (ii) an expected stock price volatility of 49.2%, (iii) a risk-free interest rate of 2.4% and (iv) an expected life of 0.5 years. For the three months ended March 31, 2005, the weighted average estimated fair value of employee purchase rights granted under the Employee Stock Purchase Plan was $1.37.

     The Company’s calculations are based on the single option valuation approach, and forfeitures are recognized as they occur.

     In December 2004, the FASB issued SFAS No. 123, Share-Based Payment(Revised 2004) (“SFAS 123R”). SFAS No. 123R is a revision of SFAS No. 123, Accounting for Stock Based Compensation

6

and supersedes Accounting Principles Board (“APB”) Opinion No. 25, Accounting for Stock Issued to Employees. This Statement establishes standards for the accounting for transactions in which an entity exchanges its equity instruments for goods or services that are based on the fair value of the entity’s equity instruments or that may be settled by the issuance of those equity instruments. The Company grants stock options to their employees and discloses the pro forma effect of compensation expense for these stock options. Under SFAS 123R, the Company will be required to record this compensation expense in the Company’s results of operations. In April 2004, the SEC voted to delay the implementation of SFAS 123R for certain companies. Accordingly, SFAS 123R will be effective for the Company at the beginning of the first annual reporting period that begins after June 15, 2005. The Company is currently evaluating the method of adoption and the impact of SFAS 123R on its financial position and results of operations .

     In June 2004, the Company implemented its Employee Stock Purchase Plan, previously approved by the Board of Directors and stockholders. As of March 31, 2005, the Company has reserved 510,792 shares of its common stock for issuance under the stock purchase plan.

     Product Warranty — The Company provides a warranty on its products for a period of up to two years, and provides for warranty costs at the time of sale based on historical activity. Components of the reserve for warranty costs consisted of the following (in thousands) for the three months ended:

2. Initial Public Offering

     On March 24, 2004, the Company entered into an agreement with respect to its initial public offering (“IPO”) to sell 6,000,000 shares of its common stock at a price to the public of $7.00 per share. After deducting the underwriting discount of $0.49 per share, the net proceeds to the Company were approximately $39.1 million. The Company received the proceeds during the second quarter of 2004. Of the net proceeds, approximately $31.1 million was used to redeem the Company’s outstanding Series A Senior Notes plus accrued interest.

     On April 21, 2004, as part of the Company’s IPO, FP-Ultra Clean, LLC, the Company’s controlling stockholder, sold 720,350 shares of the Company’s common stock in connection with the exercise by the underwriters of an over-allotment option. The Company did not receive any of the proceeds from the exercise of the over-allotment option.

     The Company’s expenses associated with the IPO totaled approximately $3.9 million, including a $2 million advisory fee paid to Francisco Partners, L.P., an affiliate of FP-Ultra Clean LLC, the Company’s controlling stockholder.

3. Inventory

     Inventory consisted of the following (in thousands):

7

4. Equipment and Leasehold Improvements, Net

     Equipment and leasehold improvements, net, consisted of the following (in thousands):

5. Notes Payable and Borrowing Arrangements

     Series A Senior Notes — The Company issued Series A Senior Notes in aggregate principal amounts of $24,130,000, $2,730,000 and $3,733,000 on November 15, 2002, November 26, 2002 and December 2, 2002, respectively. These notes accrued interest at a rate of 5% per annum, were not redeemable by the holder and could be repaid, in whole or in part, with outstanding accrued interest at any time without penalty. All Series A Senior Notes were held by related parties and employees of the Company.

     Of the Series A Senior Notes issued on November 26, 2002, $1,342,000 was issued to employees of the Company for $536,000 in cash and $806,000 in deferred compensation. The deferred compensation amount vested, in equal annual installments, over four years from the grant date. Compensation expense was recognized and the corresponding debt amounts were accreted on a straight line basis over four years from the grant date. In connection with the IPO, the balance of $580,000 in deferred compensation vested on March 24, 2004.

     As of April 2, 2004, the Company had redeemed all of the outstanding Series A Senior Notes plus accrued interest.

8

     Bank Line of Credit — In November 2004, the Company entered into a loan and security agreement providing for revolver loans of up to $20,000,000 (with a $5,000,000 sublimit for letters of credit). The revolver loans bear interest, at the Company’s option, at a rate equal to 1.5% per annum plus LIBOR or the reference rate established from time to time by the lender. Interest on the revolving loans is payable monthly, and the revolving facility matures on June 30, 2005. At any time prior to the revolving maturity date, the Company may elect to convert up to $10,000,000 of outstanding revolving borrowings into a three year term loan with quarterly payments of principal and interest. The term loan will bear interest, at the Company’s option, at a rate equal to 1.75% per annum plus LIBOR or 0.25% plus the reference rate. Obligations under the agreement are secured by a lien on substantially all of the Company’s assets. The obligations will be guaranteed by the Company’s domestic subsidiaries, and such guarantees will be secured by a lien on substantially all of their assets.

     During the quarter ended March 31, 2005, the Company entered into a loan and security agreement providing for revolver loans of up to $3,000,000 with a bank in China. The loans are denominated in Chinese Yuan, bear interest at a rate equal to 5.3% per annum and are secured by a standby letter of credit issued under the Company’s credit facility described above. Interest is payable quarterly and principal is payable within 12 months. As of March 31, 2005, the balance owing was $726,000.

6. Net Income Per Share

     Basic net income per share excludes dilution and is computed by dividing net income by the weighted average number of common shares outstanding for the period. Diluted net income per share reflects the potential dilution that would occur if outstanding securities or other contracts to issue common stock were exercised or converted into common stock.

     A summary of the Company’s net income per share for the three months ended March 31, 2005 and 2004 is as follows (in thousands, except per share amounts):

9

     The Company had securities outstanding which could potentially dilute basic earnings per share in the future, but the incremental shares from the assumed exercise of these securities were excluded in the computation of diluted net income per share, as their effect would have been anti-dilutive. Such outstanding securities consisted of the following (in thousands):

7. Commitments and Contingencies

     At March 31, 2005, the Company had purchase commitments totaling $14,900,000 that primarily related to the purchase of inventory.

10

Item 2. Managements Discussion And Analysis of Financial Condition And Results Of Operations

     The information set forth in this quarterly report on Form 10-Q contains, or may be deemed to contain, “forward-looking statements” (as defined in the U.S. Private Securities Litigation Reform Act of 1995) which reflect our current views with respect to future events and financial performance. We use words such as “anticipates,” “believes,” “plans,” “expects,” “future,” “intends,” “may,” “will,” “should,” “estimates,” “predicts,” “potential,” “continue” and similar expressions to identify these forward-looking statements. Forward-looking statements contained in this Quarterly Report include, among others, statements made regarding (1) estimates made with respect to industry conditions, (2) our ability to fund future operations with cash flows from operations, existing cash balances and debt and (3) our expansion program in China. All forward-looking statements address matters that involve risks and uncertainties. Accordingly, you should not rely on forward-looking statements, as there are or will be important factors that could cause our actual results, as well as those of the markets we serve and operate in, levels of activity, performance, achievements and prospects to differ materially from the results predicted or implied by these forward-looking statements. These risks, uncertainties and other factors include, among others, those identified below in “Management’s Discussion and Analysis of Financial Condition and Results of Operations’’ and “Risk Factors.” We undertake no obligation to publicly update or review any forward-looking statements, whether as a result of new information, future developments or otherwise.

Overview

     We are a developer and supplier of critical subsystems for the semiconductor capital equipment industry, focusing primarily on gas delivery systems and other subsystems, including frame and top-plate assemblies and process modules. Our subsystems improve efficiency and reduce the costs of our customers’ design and manufacturing processes. Our customers are primarily original equipment manufacturers (“OEMs”) of semiconductor capital equipment.

     Our business dates back to 1991 when Mitsubishi Corporation founded Ultra Clean Technology Systems and Service, Inc. Our business was operated as a subsidiary of Mitsubishi until November 2002. It was then acquired by Ultra Clean Holdings, Inc., which we refer to as the Ultra Clean acquisition. FP-Ultra Clean LLC, a wholly-owned subsidiary of Francisco Partners, L.P., owns approximately 55% of our outstanding common stock. We conduct our operating activities primarily through Ultra Clean Technology Systems and Service, Inc. and Ultra Clean Technology (Shanghai) Co., LTD., our wholly-owned subsidiaries.

     We experienced sequential sales growth for four quarters beginning with the fourth quarter of 2003 through the quarter ended June 30, 2004. Beginning in the third quarter of 2004, however, we started to experience a weakening in new orders and customer requests for cancellations and postponements of existing orders that continued through the fourth quarter of 2004, with only a slight increase in the first quarter of 2005. This weakness was due to a general softening in demand throughout the semiconductor capital equipment industry. As a result, revenues and gross margins for the first quarter of 2005 were relatively flat compared with the fourth quarter of 2004. For the first quarter of 2005, we achieved sequential growth from the fourth quarter of 2004 of $0.6 million, or 1.4%, on sales of $41.9 million. Gross margins also improved slightly on a sequential basis to $6.6 million, or 15.9% of sales from $6.4 million, or 15.5% of sales, in the fourth quarter of 2004. Operating expenses increased at a higher rate than sales due to increased salary levels for employees, higher consulting, accounting and Sarbanes-Oxley compliance costs and severance costs related to the resignation of our former Chief Financial Officer. For the first quarter of 2005, operating expenses increased sequentially to $4.9 million from

11

$4.0 million in the previous quarter. The increase in operating expenses resulted in a sequential decrease in net income to $1.2 million for the first quarter of 2005.

Results of Operations

     For the periods indicated, the following table sets forth certain costs and expenses and other income items as a percentage of sales. The table and subsequent discussion should be read in conjunction with our condensed consolidated financial statements and notes thereto included elsewhere in our quarterly report.

Sales

     We generate revenue primarily from the sale of gas delivery systems. Consistent with our commitment to expand beyond gas delivery systems and into new product markets, we also manufacture larger subsystems for the semiconductor capital equipment industry such as frame assemblies, top plate assemblies, process modules and chemical delivery modules. We began shipping frame and top plate

12

assemblies in 2004 and generated revenues of $2.0 million from these subsystems for the quarter ended March 31, 2005. Sales for the quarter ended March 31, 2005 increased 2.7% to $41.9 million from $40.8 million for the quarter ended March 31, 2004. This increase was primarily due to demand for other subsystems as our customers continue to outsource certain components of their business.

     Historically, a relatively small number of OEM customers have accounted for a significant portion of our sales. In the three months ended March 31, 2005 and 2004, respectively, we had three customers that each accounted for 10% or more of sales: Applied Materials, Inc., Lam Research Corporation and Novellus Systems, Inc. As a group, these three customers accounted for 90% of sales for the quarter ended March 31, 2005 and 93% of sales for the quarter ended March 31, 2004.

Gross Profit

     Cost of goods sold consists primarily of purchased materials, labor and overhead, including depreciation associated with the design and manufacture of products sold. Gross profit for the quarter ended March 31, 2005 increased to $6.6 million, or 15.9% of net sales, from $6.0 million, or 14.9% of net sales, for the comparable period in the prior year. This increase is primarily due to a change in the product mix during the period that was partially offset by start-up costs at our new China facility.

Research and Development Expense

     Research and development expense consists primarily of activities related to new component testing and evaluation, test equipment and fixture development, product design, and other product development activities. Research and development expense for the quarter ended March 31, 2005 increased to $0.7 million, or 1.6% of net sales, from $0.6 million, or 1.4% of net sales, for the comparable quarter in the prior year. This increase was primarily due to increased research and development spending related to product design and other product development activities for our new sub-assembly business.

Sales and Marketing Expense

     Sales and marketing expense consists primarily of salaries and commissions paid to our sales and service employees, salaries paid to our engineers who work with the sales and service employees to help determine the components and configuration requirements for new products and other costs related to the sales of our products. Sales and marketing expense for the quarter ended March 31, 2005 increased 27.0% to $0.9 million, or 2.1% of net sales, from $0.7 million, or 1.7% of net sales, for the quarter ended March 31, 2005. The increase is primarily attributable to an increase in sales activities by our engineers.

General and Administrative Expense

     General and administrative expense consists primarily of salaries paid to, and the overhead associated with our administrative staff and professional fees. General and administrative expense for the quarter ended March 31, 2005 increased 124.4% to $3.3 million, or 7.9% of net sales, from $1.5 million, or 3.6% of net sales, for the quarter ended March 31, 2004. The increase is primarily attributable to an increase in general and administrative headcount from 23 in the first quarter of 2004 to 45 (including 12 for our new facility in China) in the first quarter of 2005 and increased salary levels for employees. In addition, we also incurred accounting and consulting costs relating to Sarbanes-Oxley 404 compliance and severance costs associated with the resignation of our former Chief Financial Officer.

Stock and Other Deferred Compensation

13

     Stock and other deferred compensation expense for the quarter ended March 31, 2005 declined to $0.1 million from $0.6 million for the comparable period in the prior year. This decrease was primarily attributable to the absence of stock charges relating to the vesting of our Series A Senior Notes following our initial public offering in the prior year.

Interest Income and Other Expense, net

     Interest and other expense, net for the quarter ended March 31, 2005 decreased 99.5% compared to the quarter ended March 31, 2004. The decrease is attributable to a decline in interest expense as a result of the retirement of all of our outstanding Series A Senior Notes in 2004.

Income Tax Provision

     Our effective tax rate for the three months ended March 31, 2005 and 2004 was 31.0% and 40.0%, respectively. The effective rates were lower than the U.S. federal and state combined statutory rate primarily due to tax benefits on exempt income including export sales.

Liquidity and Capital Resources

     As of March 31, 2005, we had cash of $10.8 million as compared to $11.4 million as of December 31, 2004.

     We used approximately $1.0 million of cash in operating activities during the three months ended March 31, 2005 as growth in inventory and accounts receivable exceeded net income and growth in accounts payable. We increased inventories to support the increased sales activities and initiate operations at our China facility, which also resulted in increased payables.

     We used approximately $0.3 million of cash in investing activities during the three months ended March 31, 2005 to purchase equipment and leasehold improvements, including $0.2 million of purchases for our new facility in China.

     We generated cash of $0.7 million from financing activities during the three months ended March 31, 2005 primarily through bank borrowings, which were used to fund start-up costs at our new facility in China.

     During the quarter ended March 31, 2005, we entered into a loan and security agreement providing for revolver loans of up to $3,000,000 with a bank in China. As of March 31, 2005, $0.7 million was outstanding under this loan agreement.

     Other than operating leases for certain equipment and real estate, we have no significant off-balance sheet transactions, unconditional purchase obligations or similar instruments.

     We anticipate that we will continue to finance our operations with cash flows from operations, existing cash balances and a combination of long-term debt and/or lease financing and additional sales of equity securities. The combination and sources of capital will be determined by management based on our then current needs and prevailing market conditions. Although cash requirements will fluctuate based on the timing and extent of many factors, management believes that cash generated from operations, together with the liquidity provided by existing cash balances and borrowing capability, will be sufficient to satisfy our liquidity requirements for the next 12 months.

14

Contractual Obligations and Contingent Liabilities and Commitments

     Other than operating leases for certain equipment and real estate, we have no significant off-balance sheet transactions, unconditional purchase obligations or similar instruments and, other than with respect to the revolving credit facility described above, are not a guarantor of any other entities’ debt or other financial obligations. The following table presents a summary of our future minimum lease payments: debt schedule

During the quarter ended March 31, 2005, we entered into a loan and security agreement providing for revolver loans of up to $3.0 million with a bank in China. The loans are denominated in Chinese Yuan, bear interest at a rate equal to 5.3% per annum and are secured by a standby letter of credit. Interest is payable quarterly and principal is payable within 12 months. As of March 31, 2005, the balance owing was $0.7 million.

At March 31, 2005, we had purchase commitments totaling $14.9 million that primarily related to the purchase of inventory.

Critical Accounting Policies, Significant Judgments and Estimates

     The SEC released FR-60 “Cautionary Advice Regarding Disclosure About Critical Accounting Policies,” which encourages companies to disclose critical accounting policies, judgments and uncertainties affecting the application of those policies and the likelihood that materially different financial results would be reported under different conditions or with the use of different assumptions. Such critical accounting policies, as defined by the SEC, are those that are both most significant to the depiction of our financial condition and results and require the use of difficult, subjective and complex

15

judgment by management, often as a result of the need to make estimates about the effect of matters that are uncertain.

     In December 2004, the FASB issued SFAS No. 123, Share-Based Payment (Revised 2004) (“SFAS 123R”). SFAS No. 123R is a revision of SFAS No. 123, Accounting for Stock Based Compensation and supersedes Accounting Principles Board (“APB”) Opinion No. 25, Accounting for Stock Issued to Employees. This Statement establishes standards for the accounting for transactions in which an entity exchanges its equity instruments for goods or services that are based on the fair value of the entity’s equity instruments or that may be settled by the issuance of those equity instruments. We grant stock options to our employees and disclose the pro forma effect of compensation expense for these stock options. Under SFAS 123R, we will be required to record this compensation expense in our results of operations. In April 2004, the SEC voted to delay the implementation of SFAS 123R for certain companies. Accordingly, SFAS 123R will be effective for us at the beginning of the first annual reporting period that begins after June 15, 2005. We are currently evaluating the method of adoption and the impact of SFAS 123R on our financial position and results of operations.

     Our condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States, which requires management to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue and expenses and related disclosure at the date of our financial statements. Estimates and judgments are reviewed on an on-going basis, including those related to sales, inventories, intangible assets, stock compensation and income taxes. The estimates and judgments are based on historical experience and on various other factors that we believe to be reasonable under the circumstances, the results of which form the basis of the judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates. We consider certain accounting policies related to the Ultra Clean acquisition, revenue recognition, inventory valuation, accounting for income taxes, valuation of intangible assets and goodwill and stock options to employees to be critical policies due to the estimates and judgments involved in each. A further discussion can be found in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our Annual Report on Form 10-K filed with the SEC on March 30, 2005.

Risk Factors

The highly cyclical nature of the semiconductor industry and general economic slowdowns could harm our operating results.

     Our business and operating results depend in significant part upon capital expenditures by manufacturers of semiconductors, which in turn depend upon the current and anticipated market demand for semiconductors. Historically, the semiconductor industry has been highly cyclical, with recurring periods of over-supply of semiconductor products that have had a severe negative effect on the demand for capital equipment used to manufacture semiconductors. We have experienced significant fluctuations in customer orders for our products. Our sales were $184.2 million in 2004, $77.5 million in 2003, and $84.3 million in 2002. Beginning in the third quarter of 2004, however, we started to experience a weakening in new orders and customer requests for cancellations and postponements of existing orders that continued throughout the remainder of 2004 and is likely to continue into at least the latter half of 2005. Historically, semiconductor industry slowdowns have had, and future slowdowns may have, a material adverse effect on our operating results.

16

     In addition, the uncertainty regarding the growth rate of economies throughout the world has caused companies to reduce capital investment and may cause further reduction of such investments. These reductions have been particularly severe in the semiconductor capital equipment industry. A potential rebound in the worldwide economy in the near future will not necessarily mean that our business will experience similar effects. Moreover, if the worldwide economy does not rebound in the near future, our business may be further harmed.

Our quarterly revenue and operating results fluctuate significantly from period to period and this may cause volatility in our common stock price.

     Our quarterly revenue and operating results have fluctuated significantly in the past and we expect them to continue to fluctuate in the future for a variety of reasons, including:

	•	demand for and market acceptance of our products as a result of the cyclical nature of the semiconductor industry or otherwise, often resulting in reduced sales during industry downturns and increased sales during periods of industry recovery;
	•	changes in the timing and size of orders by our customers;
	•	cancellations and postponements of previously placed orders;
	•	pricing pressure from either our competitors or our customers, resulting in the reduction of our product prices;
	•	disruptions or delays in the manufacturing of our products or in the supply of components or raw materials that are incorporated into or used to manufacture our products, thereby causing us to delay the shipment of products;
	•	changes in design-to-delivery cycle times;
	•	inability to quickly reduce our costs in response to decreased demand for our products, as our costs are relatively fixed in the short-term;
	•	changes in our mix of products sold;
	•	write-offs of excess or obsolete inventory; and
	•	announcements by our competitors of new products, services or technological innovations, which may, among other things, render our products less competitive.

     As a result of the foregoing, we believe that quarter-to-quarter comparisons of our revenue and operating results may not be meaningful, and that these comparisons may not be an accurate indicator of our future performance. Changes in the timing or terms of a small number of transactions could disproportionately affect our operating results in any particular quarter. Moreover, our operating results in one or more future quarters may fail to meet the expectations of securities analysts or investors. If this occurs, we would expect to experience an immediate and significant decline in the trading price of our common stock.

We rely on a small number of customers for a significant portion of our sales, and any impairment of our relationships with these customers would adversely affect our business.

     A relatively small number of OEM customers have historically accounted for a significant portion of our sales, and we expect this trend to continue. Applied Materials, Inc., Lam Research Corporation and Novellus Systems, Inc. as a group accounted for 93% of our sales in 2004, 92% of our sales in 2003 and 98% of our sales in 2002. Because of the small number of OEMs in our industry, most of whom are already our customers, it would be difficult to replace lost revenue resulting from the loss of, or the reduction, cancellation or delay in purchase orders by, any one of these customers. Consolidation among our customers or a decision by any one or more of our customers to outsource all manufacturing

17

and assembly work to a single equipment manufacturer may further concentrate our business in a limited number of customers and expose us to increased risks relating to dependence on a small number of customers. In addition, any significant pricing pressure exerted by a key customer could adversely affect our operating results.

     We have had to qualify, and are required to maintain our status, as a supplier for each of our customers. This is a lengthy process that involves the inspection and approval by a customer of our engineering, documentation, manufacturing and quality control procedures before that customer will place volume orders. Attempts to lessen the adverse effect of any loss of or reduction in sales to an existing customer through the rapid addition of one or more new customers would be difficult because of these qualification requirements. Consequently, our business, operating results and financial condition would be adversely affected by the loss of, or any reduction in orders by, any of our significant customers.

Because we are subject to order and shipment uncertainties, any significant reductions, cancellations or delays in customer orders could cause our revenue to decline and our operating results to suffer.

     Our revenue is difficult to forecast because we generally do not have a material backlog of unfilled orders and because of the short time frame within which we are often required to design, produce and deliver products to our customers. Most of our revenue in any quarter depends on customer orders for our products that we receive and fulfill in the same quarter. We do not have long-term purchase orders or contracts that contain minimum purchase commitments from our customers. Instead, we receive non-binding forecasts of the future volume of orders from our customers. At times, we order and build component inventory in advance of the receipt of actual customer orders. Customers may cancel order forecasts, change production quantities from forecasted volumes or delay production for reasons beyond our control. Furthermore, reductions, cancellations or delays in customer order forecasts occur without penalty to or compensation from the customer. Reductions, cancellations or delays in forecasted orders could cause us to hold inventory for longer than anticipated, which could reduce our gross profit, restrict our ability to fund our operations and cause us to incur unanticipated reductions or delays in revenue. If we do not obtain orders as we anticipate, we could have excess component inventory for a specific product that we would not be able to sell to another customer, likely resulting in inventory write-offs, which could have a material adverse affect on our business, financial condition and operating results. In addition, because many of our costs are fixed in the short-term, we could experience deterioration in our gross profit when our production volumes decline.

The manufacturing of our products is highly complex, and if we are not able to effectively manage our manufacturing and procurement process, our business and operating results would suffer.

     The manufacturing of our products is a highly complex process that involves the integration of multiple components and requires effective management of our supply chain while meeting our customers’ design-to-delivery cycle time requirements. Through the course of the manufacturing process, our customers may modify design and system configurations in response to changes in their own customers’ requirements. In order to rapidly respond to these modifications and deliver our products to our customers in a timely manner, we must effectively manage our manufacturing and procurement process. If we fail to effectively manage this process, we risk losing customers and damaging our reputation. In addition, if we acquire inventory in excess of demand or that does not meet customer specifications, we would incur excess or obsolete inventory costs. As a result, this could limit our growth and have a material adverse effect on our business, financial condition and operating results.

18

OEMs may not continue to outsource subsystem manufacturing for their capital equipment which would adversely impact our operating results.

     The success of our business depends on OEMs continuing to outsource the manufacturing of gas delivery systems for their semiconductor capital equipment. Most of the largest OEMs have already outsourced a significant portion of their gas delivery systems. If OEMs do not continue to outsource gas delivery systems for their capital equipment, our revenue would be significantly reduced, which would have a material adverse affect on our business, financial condition and operating results. In addition, if we are unable to obtain additional business from OEMs even if they continue to outsource their production of gas delivery systems, our business, financial condition and operating results could be adversely affected.

We may experience difficulties and incur significant costs as a result of evaluating or completing acquisitions of companies, assets, businesses or technologies, and the anticipated benefits of any such completed acquisitions may never be realized.

     We frequently evaluate acquisitions of, or significant investments in, complementary companies, assets, businesses or technologies. Even if an acquisition or other investment is not completed, we may incur significant costs in evaluating such acquisition or investment, which could have an adverse effect on our results of operations. Any future acquisitions would be accompanied by risks such as:

	•	difficulties in assimilating the operations and personnel of acquired companies or businesses;
	•	difficulties in integrating information systems of acquired companies or businesses;
	•	diversion of management’s attention from ongoing business concerns;
	•	potential inability to maximize our financial and strategic position through the successful incorporation of acquired technology into our products;
	•	additional expense associated with amortization of depreciation of acquired assets;
	•	maintenance of uniform standards, controls, procedures and policies;
	•	impairment of existing relationships with employees, suppliers and customers as a result of the integration of new personnel;
	•	dilution to our stockholders in the event we issue stock as consideration to finance an acquisition; and
	•	increased leverage if we incur debt to finance an acquisition.

We may not be able to successfully integrate any business, products, technologies or personnel that we might acquire in the future, and our failure to do so could have a material adverse effect on our business, financial condition and operating results.

We have recently established operations in China, which exposes us to new risks associated with operating in a foreign country.

     We are exposed to political, economic, legal and other risks associated with operating in China, including:

	•	tariffs and other barriers;
	•	timing and availability of export licenses;
	•	political, civil and economic instability;
	•	disruptions to our and our customers’ operations due to the outbreak of communicable diseases, such as SARS;

19

	•	disruptions in operations due to weakness of China’s domestic infrastructure, including transportation and energy;
	•	difficulties in attracting new international customers;
	•	difficulties in accounts receivable collections;
	•	difficulties in staffing and managing a distant international subsidiary and branch operations;
	•	foreign currency exchange fluctuations;
	•	the burden of complying with foreign and international laws and treaties; and
	•	potentially adverse tax consequences.

     In addition, while over the past several years, the Chinese government has pursued economic reform policies including the encouragement of private economic activity and greater economic decentralization, due to efforts to control the pace of growth or for other reasons, the Chinese government may not continue to pursue these policies or may significantly alter them to our detriment from time to time without notice. Changes in these policies by the Chinese government resulting in changes in laws, regulations, or their interpretation, the imposition of confiscatory taxation, restrictions on currency conversion or imports and sources of supply could materially and aversely affect our Chinese operations, which could result in a total loss of our investment in that country and materially and adversely affect our future operating results.

We have experienced significant growth in our business in recent periods, and we may not be able to manage our future growth successfully.

     Our ability to successfully execute our business plan in a rapidly evolving market requires an effective planning and management process. We have increased, and plan to continue to increase, the scope of our operations. Due to the cyclical nature of the semiconductor industry, however, future growth is difficult to predict. Our expansion efforts could be expensive and may strain our managerial and other resources. To manage future growth effectively, we must maintain and enhance our financial and operating systems and controls and manage expanded operations. The number of people we employ has grown and we expect this number to continue to grow over time. As of December 31, 2001 we had 130 employees and as of March 31, 2005 we had 371 employees. The addition and training of new employees may lead to short-term quality control problems and place increased demands on our management and experienced personnel. If we do not manage growth properly, our business, operating results and financial condition could be adversely affected.

Our business is largely dependent on the know-how of our employees, and we generally do not have a protected intellectual property position.

     Our business is largely dependent upon our design, engineering, manufacturing and testing know-how. We rely on a combination of trade secrets and contractual confidentiality provisions, and to a much lesser extent, patents, copyrights and trademarks, to protect our proprietary rights. Accordingly, our intellectual property position is more vulnerable than it otherwise would be if it were protected by issued patents. If we fail to successfully protect our proprietary rights, our competitive position could suffer, which could harm our operating results. We may be required to spend significant resources to monitor and protect our proprietary rights. In addition, we may not be able to detect infringement of our proprietary rights and may lose our competitive position in the market if any such infringement occurs. In addition, competitors may design around our technology or develop competing technologies and know-how.

20

Third parties may claim we are infringing their intellectual property which could subject us to litigation or licensing expenses, and we may be prevented from selling our products if any such claims prove successful.

     We may from time to time become subject to claims by third parties that we are infringing their intellectual property rights. In addition, we may be unaware of intellectual property rights of others that may be applicable to our products. Any litigation regarding patents or other intellectual property could be costly and time-consuming and divert our management and key personnel from our business operations, any of which could have a material and adverse effect on our business and results of operations. The complexity of the technology involved in our products and the uncertainty of intellectual property litigation increase these risks. Claims of intellectual property infringement may also require us to enter into costly license agreements. However, we may not be able to obtain licenses on terms acceptable to us, or at all. We also may be subject to significant damages or injunctions against the development and sale of certain of our products if any such claims prove successful.

If we do not keep pace with developments in the semiconductor industry and with technological innovation generally, our products may not be competitive.

     Rapid technological innovation in semiconductor manufacturing processes requires the semiconductor capital equipment industry to anticipate and respond quickly to evolving customer requirements and could render our current product offerings and technology obsolete. Technological innovations are inherently complex. We must devote resources to technology development in order to keep pace with the rapidly evolving technologies used in the semiconductor manufacturing process. We believe that our future success will depend upon our ability to design, engineer and manufacture products that meet the changing needs of our customers. This requires that we successfully anticipate and respond to technological changes in design, engineering and manufacturing processes in a cost-effective and timely manner. If we are unable to integrate new technical specifications into competitive product designs, develop the technical capabilities necessary to manufacture new products or make necessary modifications or enhancements to existing products, our business prospects could be harmed.

     The timely development of new or enhanced products is a complex and uncertain process which requires that we:

	•	design innovative and performance-enhancing features that differentiate our products from those of our competitors;
	•	identify emerging technological trends in the semiconductor industry, including new standards for our products;
	•	accurately identify and design new products to meet market needs;
	•	collaborate with OEMs to design and develop products on a timely and cost-effective basis;
	•	successfully manage development production cycles; and
	•	respond effectively to technological changes or product announcements by others.

The industry in which we participate is highly competitive and rapidly evolving, and if we are unable to compete effectively, our operating results would be harmed.

     Our industry is highly competitive and rapidly evolving. Our competitors are primarily companies that design and manufacture gas delivery systems for semiconductor capital equipment. Although we have not faced competition in the past from the largest subsystem and component manufacturers in the semiconductor capital equipment industry, these suppliers could compete with us in the future.

21

Increased competition has in the past resulted, and could in the future result, in price reductions, reduced gross margins or loss of market share, any of which would harm our operating results. Pricing pressure is always present, as we attempt to increase market share with our existing customers. Competitors may introduce new products for the markets currently served by our products. These products may have better performance, lower prices and achieve broader market acceptance than our products. Further, OEMs typically own the design rights to their products and may provide these designs to subsystem manufacturers. If our competitors obtain proprietary rights to these designs such that we are unable to obtain the designs necessary to manufacture products for our OEM customers, our business, financial condition and operating results could be adversely affected.

     Our competitors may have greater financial, technical, manufacturing and marketing resources than we do. As a result, they may be able to respond more quickly to new or emerging technologies and changes in customer requirements, devote greater resources to the development, promotion, sale and support of their products, and reduce prices to increase market share. Moreover, there may be merger and acquisition activity among our competitors and potential competitors that may provide our competitors and potential competitors with an advantage over us by enabling them to expand their product offerings and service capabilities to meet a broader range of customer needs. Further, if one of our customers develops or acquires the internal capability to develop and produce gas delivery systems, the loss of that customer could have a material adverse effect on our business, financial condition and operating results. The introduction of new technologies and new market entrants may also increase competitive pressures.

We must achieve design wins to retain our existing customers and to obtain new customers.

     New semiconductor capital equipment typically has a lifespan of several years, and OEMs frequently specify which systems, subassemblies, components and instruments are to be used in their equipment. Once a specific system, subassembly, component or instrument is incorporated into a piece of semiconductor capital equipment, it will likely continue to be incorporated into that piece of equipment for a period of at least several months before the OEM switches to the product of another supplier. Accordingly, it is important that our products are designed into the new semiconductor capital equipment of OEMs, which we refer to as a design win, in order to retain our competitive position with existing customers and to obtain new customers.

     We incur technology development and sales expenses with no assurance that our products will ultimately be designed into an OEM’s semiconductor capital equipment. Further, developing new customer relationships, as well as increasing our market share at existing customers, requires a substantial investment of our sales, engineering and management resources without any assurance from prospective customers that they will place significant orders. We believe that OEMs often select their suppliers and place orders based on long-term relationships. Accordingly, we may have difficulty achieving design wins from OEMs that are not currently our customers. Our operating results and potential growth could be adversely affected if we fail to achieve design wins with leading OEMs.

We have and will continue to incur increased costs as a result of being a public company.

     We have and will continue to face increased legal, accounting, administrative and other costs and expenses as a public company that we did not incur as a private company. The Sarbanes-Oxley Act of 2002, as well as new rules subsequently implemented by the Securities and Exchange Commission, the Public Company Accounting Oversight Board and the Nasdaq National Market, have required changes in the corporate governance practices of public companies. We expect these new rules and regulations to increase our legal and financial compliance costs and to make legal, accounting and administrative

22

activities more time-consuming and costly. For example, we have incurred substantially higher costs to obtain directors and officers insurance and create an ongoing compliance program to meet the requirements of Sarbanes-Oxley 404 which we will be required to be in compliance with after January 1, 2006.

     In addition, as we gain experience with the requirements of being a public company combined with the increased activities of our business, we will need to continually evaluate our business processes and management structure, which could cause us to incur additional overhead costs.

We may not be able to respond quickly enough to increases in demand for our products.

     Demand shifts in the semiconductor industry are rapid and difficult to predict, and we may not be able to respond quickly enough to an increase in demand. Our ability to increase sales of our products depends, in part, upon our ability to:

	•	mobilize our supply chain in order to maintain component and raw material supply;
	•	optimize the use of our design, engineering and manufacturing capacity in a timely manner;
	•	deliver our products to our customers in a timely fashion;
	•	expand, if necessary, our manufacturing capacity; and
	•	maintain our product quality as we increase production.

     If we are unable to respond to rapid increases in demand for our products on a timely basis or to manage any corresponding expansion of our manufacturing capacity effectively, our customers could increase their purchases from our competitors, which would adversely affect our business.

Our dependence on our suppliers may prevent us from delivering an acceptable product on a timely basis.

     We rely on both single source and sole source suppliers, some of whom are relatively small in size, for many of the components we use in our products. In addition, our customers often specify components made by particular suppliers that we must incorporate into their products. Our suppliers are under no obligation to provide us with components. As a result, the loss of or failure to perform by any of these providers could adversely affect our business and operating results. In addition, the manufacturing of certain components and subassemblies is an extremely complex process. Therefore, if a supplier was unable to provide the volume of components we require on a timely basis and at acceptable prices, we would have to identify and qualify replacements from alternative sources of supply. The process of qualifying new suppliers for these complex components is lengthy and could delay our production and adversely affect our business, operating results and financial condition. We may also experience difficulty in obtaining sufficient supplies of components and raw materials in times of significant growth in our business. For example, we have in the past experienced shortages in supplies of various components, such as mass flow controllers, valves and regulators, and certain prefabricated parts, such as sheet metal enclosures, used in the manufacture of our products. In addition, one of our competitors manufactures mass flow controllers that may be specified by one or more of our customers. If we are unable to obtain these particular mass flow controllers from our competitor or convince a customer to select alternative mass flow controllers, we may be unable to meet that customer’s requirements, which could result in a loss of market share.

23

Defects in our products could damage our reputation, decrease market acceptance of our products, cause the unintended release of hazardous materials and result in potentially costly litigation.

     A number of factors, including design flaws, material and component failures, contamination in the manufacturing environment, impurities in the materials used and unknown sensitivities to process conditions, such as temperature and humidity, as well as equipment failures, may cause our products to contain undetected errors or defects. Problems with our products may:

	•	cause delays in product introductions and shipments;
	•	result in increased costs and diversion of development resources;
	•	cause us to incur increased charges due to unusable inventory;
	•	require design modifications;
	•	decrease market acceptance of, or customer satisfaction with, our products, which could result in decreased sales and product returns; or
	•	result in lower yields for semiconductor manufacturers.

     If any of our products contain defects or have reliability, quality or compatibility problems, our reputation might be damaged and customers might be reluctant to buy our products. We may also face a higher rate of product defects as we increase our production levels. Product defects could result in the loss of, or impair our ability to attract, customers. In addition, we may not find defects or failures in our products until after they are installed in a semiconductor manufacturer’s fabrication facility. We may have to invest significant capital and other resources to correct these problems. Our current or potential customers also might seek to recover from us any losses resulting from defects or failures in our products. Hazardous materials flow through and are controlled by our products and an unintended release of these materials could result in serious injury or death. Liability claims could require us to spend significant time and money in litigation or pay significant damages.

The technology labor market is very competitive, and our business will suffer if we are unable to hire and retain key personnel.

     Our future success depends in part on the continued service of our key executive officers, as well as our research, engineering, sales, manufacturing and administrative personnel, most of whom are not subject to employment or non-competition agreements. In addition, competition for qualified personnel in the technology industry is intense, and we operate in geographic locations in which labor markets are particularly competitive. Our business is particularly dependent on expertise which only a very limited number of engineers possess. The loss of any of our key employees and officers, including our Chief Executive Officer, Vice President of Engineering, Vice President of Sales and Vice President of Technology, or the failure to attract and retain new qualified employees, would adversely affect our business, operating results and financial condition.

We may not be able to fund our future capital requirements from our operations, and financing from other sources may not be available on favorable terms or at all.

     We made capital expenditures of $3.4 million in 2004, $0.5 million in 2003 and $1.8 million in 2002. We made capital expenditures of $0.3 million in the first quarter of fiscal 2005, of which $0.2 million was for facility leasehold improvements and equipment in connection with the establishment of a manufacturing facility in Shanghai, China. The amount of our future capital requirements will depend on many factors, including:

24

	•	the cost required to ensure access to adequate manufacturing capacity;
	•	the timing and extent of spending to support product development efforts;
	•	the timing of introductions of new products and enhancements to existing products;
	•	changing manufacturing capabilities to meet new customer requirements; and
	•	market acceptance of our products.

     Although we currently have credit facilities, to the extent that existing cash, together with any cash from operations, are insufficient to fund our future activities, we may need to raise additional funds through public or private equity or debt financing. Future equity financings could be dilutive to holders of our common stock, and debt financings could involve covenants that restrict our business operations. If we cannot raise funds on acceptable terms, if and when needed, we may not be able to develop or enhance our products, take advantage of future opportunities, grow our business or respond to competitive pressures or unanticipated requirements, any of which could adversely affect our business, operating results and financial condition.

If environmental contamination were to occur in one of our manufacturing facilities, we could be subject to substantial liabilities.

     We use substances regulated under various foreign, domestic, federal, state and local environmental laws in our manufacturing facilities. Our failure or inability to comply with existing or future environmental laws could result in significant remediation liabilities, the imposition of fines or the suspension or termination of the production of our products. In addition, we may not be aware of all environmental laws or regulations that could subject us to liability.

If our facilities were to experience catastrophic loss due to natural disasters, our operations would be seriously harmed.

     Our facilities could be subject to a catastrophic loss caused by natural disasters, including fires and earthquakes. We have facilities in areas with above average seismic activity, such as our manufacturing and headquarters facilities in Menlo Park, California. If any of our facilities were to experience a catastrophic loss, it could disrupt our operations, delay production and shipments, reduce revenue and result in large expenses to repair or replace the facility. In addition, we have in the past experienced, and may in the future experience, extended power outages at our Menlo Park, California facilities. We do not carry insurance policies which cover potential losses caused by earthquakes or other natural disasters or power loss.

We may not be able to continue to secure adequate facilities to house our operations and any move to a new facility could be disruptive to our operations.

     During 2004 we completed negotiations with the landlord of our Menlo Park, California facilities. As a result of certain proposed zoning changes in the city of Menlo Park, we were only able to extend the lease until July 31, 2005. At the expiration, the lease will continue on a month-to-month basis and may not be terminated by our landlord upon less than nine months prior written notice. If we are unable to secure a lease for the Menlo Park facility on favorable terms at the end of the current lease, we will need to find new facilities and move all of our Menlo Park manufacturing, engineering, sales and marketing and administrative functions into new facilities. This move could disrupt manufacturing and we would incur additional costs associated with relocation to new facilities, which could have a material adverse effect on our results of operations.

25

Risks Related to Our Ownership by Francisco Partners

We will continue to be controlled by FP-Ultra Clean, LLC as long as FP-Ultra Clean, LLC owns a significant percentage of our common stock, and our other stockholders will be unable to affect the outcome of stockholder voting during such time.

     Francisco Partners, through its membership interests in FP-Ultra Clean, LLC, beneficially owns approximately 55% of our outstanding common stock. Pursuant to a stockholder’s agreement, our principal stockholder, FP-Ultra Clean, LLC, which is controlled by Francisco Partners, has the right, to nominate for election a majority of the members of our board of directors for so long as it holds at least 25% of our outstanding common stock.

     The stockholder’s agreement also provides that our board of directors may not take certain significant actions without the approval of FP-Ultra Clean, LLC as long as FP-Ultra Clean, LLC owns at least 25% of our outstanding common stock. These actions include:

	•	mergers, acquisitions or certain sales of assets;
	•	any liquidation, dissolution or bankruptcy;
	•	issuances of securities;
	•	determination of compensation and benefits for our chief executive officer and chief financial officer;
	•	appointment or dismissal of any of the chairman of our board of directors, chief executive officer, chief financial officer or any other executive officer in any similar capacity;
	•	amendments to the stockholder’s agreement or exercise or waiver of rights under the stockholders’ agreement; and
	•	amendments to our charter or bylaws.

     Such power could have the effect of delaying, deterring or preventing a change of control, business combination or other transaction that might otherwise be beneficial to our stockholders. FP-Ultra Clean, LLC also is not prohibited from selling a controlling interest in us to a third party or a participant in our industry. For additional information regarding our relationship with FP-Ultra Clean, LLC, you should read the section entitled “Certain Relationships and Related Party Transactions” contained in our registration statement on Form S-1.

FP-Ultra Clean, LLC and its designees on our board of directors may have interests that conflict with our interests and the interests of our other stockholders.

     FP-Ultra Clean, LLC and its designees on our board of directors may have interests that conflict with, or are different from, our own and those of our other stockholders. Francisco Partners, which is the beneficial holder of approximately 55% of our outstanding common stock, through its membership interests in FP-Ultra Clean, LLC, has invested in or acquired other businesses that are involved in the semiconductor industry and may invest in or acquire others in the future. Conflicts of interest between FP-Ultra Clean, LLC and us or our other stockholders may arise. Our amended and restated certificate of incorporation does not contain any provisions designed to facilitate resolution of actual or potential conflicts of interest, or to ensure that potential business opportunities that may become available to both FP-Ultra Clean, LLC and us will be reserved for or made available to us. If an actual or potential conflict of interest develops involving one of our directors, our corporate governance guidelines provide that the director must report the matter immediately to our board of directors and audit committee for

26

evaluation and appropriate resolution. Further, such director must recuse himself or herself from participation in the related discussion and abstain from voting on the matter. Nonetheless, conflicts of interest may not be resolved in a manner favorable to us or our other stockholders. In addition, FP-Ultra Clean, LLC and its director designees could delay or prevent an acquisition, merger or other transaction even if the transaction would benefit our other stockholders. In addition, FP-Ultra Clean, LLC’s significant concentration of share ownership may adversely affect the trading price of our common stock because investors often perceive disadvantages in owning stock in companies with controlling stockholders.

Risks Related to the Securities Markets and Ownership of Our Common Stock

Future sales of our common stock by existing stockholders could depress our stock price.

     Sales of substantial amounts of our common stock by FP-Ultra Clean, LLC, or the perception that these sales might occur, may depress prevailing market prices of our common stock. The shares owned by FP-Ultra Clean, LLC have the benefit of an agreement with us that provides for customary demand and piggyback registration rights.

The market for our stock could be subject to significant fluctuation.

     An active public market for our common stock may not be sustained. The size of our public market capitalization is relatively small and there are periods during which the volume of our shares that are traded is low. The market price of our common stock could be subject to significant fluctuations. Among the factors that could affect our stock price are:

	•	quarterly variations in our operating results;
	•	our ability to successfully introduce new products and manage new product transitions;
	•	changes in revenue or earnings estimates or publication of research reports by analysts;
	•	speculation in the press or investment community;
	•	strategic actions by us or our competitors, such as acquisitions or restructurings;
	•	announcements relating to any of our key customers, significant suppliers or the semiconductor manufacturing and capital equipment industry generally;
	•	general market conditions;
	•	the effects of war and terrorist attacks, and
	•	domestic and international economic factors unrelated to our performance.

     The stock markets in general, and the markets for technology stocks in particular, have experienced extreme volatility that has often been unrelated to the operating performance of particular companies. These broad market fluctuations may adversely affect the trading price of our common stock.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

     Market risk represents the risk of changes in value of a financial instrument caused by fluctuations in interest rates, foreign exchange rates or equity prices. In April 2004 we used the majority of the net proceeds from our IPO to redeem our outstanding Series A Senior Notes and, as of March 31, 2005, have $0.7 million of indebtedness for borrowed money at a weighted average interest rate of 5.3%. Therefore, our exposure to market risk related to interest rates is limited. If and when we enter into future borrowing arrangements or borrow under our existing revolving credit facilities, we may seek to manage exposure to interest rate changes by using a mix of debt maturities and variable- and fixed-rate

27

debt, together with interest rate swaps where appropriate, to fix or lower our borrowing costs. We do not make material sales in currencies other than the United States Dollar or have material purchase obligations outside of the United States with the exception of China where we have purchase commitments totaling $2.2 million in United States Dollar equivalents. Furthermore, the Chinese currency fluctuates in direct proportion to the United States Dollar. Therefore, we do not generally have exposure to foreign currency exchange risks.

     Item 4. Controls and Procedures

     As of the end of the period covered by this report on Form 10-Q, our Chief Executive Officer and Chief Financial Officer evaluated, with the participation of our management, the effectiveness of our “disclosure controls and procedures” (as defined in Exchange Act Rule 13a—15(e) and Rule 15(d)—15(e)). Based on the evaluation, which disclosed no significant deficiencies or material weaknesses, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were adequate and designed to ensure that material information related to us and our consolidated subsidiaries would be made known to them by others within these entities.

28

PART II. OTHER INFORMATION

Item 1. Legal Proceedings

     From time to time, we are subject to various legal proceedings and claims, either asserted or unasserted, that arise in the ordinary course of business. We are not currently party to any material legal proceedings.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

None.

Item 3. Defaults Upon Senior Securities

None.

Item 4. Submission of Matters to a Vote of Security Holders

None.

Item 5. Other Information

Item 6. Exhibits

	(a)	Exhibits
		Exhibits filed with the current Report on Form 10-Q for the quarter ended March 31, 2005 are as follows:

29

SIGNATURES

     Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

EXHIBIT INDEX